Car Ghost Immobiliser
Ghost Immobiliser The Ghost Immobiliser, a sophisticated system that stops your vehicle from starting without a unique code input using buttons that are already in place. The device is invisible to thieves and operates in a silent manner.
It also helps in preventing newer methods, such as hotwiring and theft of relays. It could also result in an improvement in your insurance premium.
No Radio Frequencies
A car ghost immobiliser operates differently to an ordinary immobiliser because there is no radio frequency transmitted, preventing it from being able to be bypassed by thieves using a simple and easily accessible device for cloning. This means that a ghost immobiliser won't stop your car from being activated even if a criminal has succeeded in cloning your key or taken it.
Ghost immobilisers are also effective against relay attacks. The signal from your keyfob is amplified to fool the system into allowing your car to start. The Ghost will recognize this and refuse to start the vehicle until you enter the PIN code. This is a great way to stop car thieves who have simple-to-use and inexpensive tools to duplicate your vehicle.
The Ghost can also be installed discreetly (without damaging your vehicle) and will only function when the proper pin sequence has been entered. The Ghost is only accessible to the owner, so nobody else will be able to use your vehicle unless they have your pin code. Certain systems let owners create valet or service mode to temporarily allow another person to drive the vehicle without having to disclose their pin number, thus protecting them from opportunistic thieves.
The Ghost is not only easy to use and quick to disarm but can also be linked to a car tracker so you can track your vehicle. Some insurance companies offer discounts on car insurance for vehicles equipped with Ghosts. This is an excellent benefit as it increases the security of your vehicle.
Although the Ghost immobiliser is not Thatcham certified but it is an aftermarket product that has been independently tested and proven to work. If you are thinking of buying a used car that has the Ghost immobiliser fitted, then inquire with the seller if they are willing to transfer it to the new vehicle. This will ensure that your new vehicle is more secure than if the previous owner had not transferred it.
No Circuit Cuts
Even if your vehicle is stolen, thieves will not be able to unlock it. They'll need to know the sequence of buttons utilized to unlock your vehicle and won't be able to do this if they are not possessing this knowledge. This will further deter them and make sure that they don't attempt the theft in the first place as they might not be able to drive away with the car.
If you have an GPS tracker in your Ghost can also function as an anti-theft device as it can send a signal to the tracker which will trigger a siren and warn the tracker of an attempted theft. This feature can be activated at any time through your online dashboard.
When you connect your Ghost to the CAN data network, it will identify your vehicle and its owner by using the unique pin code programmed during installation. This allows the device communicate with your vehicle's ECU and disable the engine. This means that only the vehicle owner or a person who has the PIN code, can start the engine.
Because the pin code was constructed from existing buttons within easy reach of the driver (such as cruise control and stereo mute) it is mathematically inaccessible to guess by any potential thieves. Your engineer will give you an Pin Code Override Card that is like a lottery scratch-off ticket. It simply needs to be scratched to reveal the code.
Your Ghost isn't detectable by these methods, as it does not use circuit breakers or radio frequencies. It is therefore unaffected by the latest techniques employed by organized gangs who are experts in the use of RF scanning technology as well as code-grabbing. It is also a life-time product, and can easily be removed from your car after you sell it, which means that you won't lose any of the protection that you have put into.
No Key Fobs
In the UK Vehicle theft is on the rise in the UK. The need for proactive measures to safeguard your precious vehicles from criminals who are opportunistic. The Autowatch Ghost Immobiliser is an innovative device that provides an effective defense against key hacking, cloning, and signals relay attacks. It is a discrete and highly effective car security system that is simple to install in a wide variety of vehicles.
Contrary to conventional systems that rely on key fobs, the Ghost immobiliser is not equipped with LED indicators and does not operate through an electronic signal relay. Therefore, it is unaffected by signal interception and is unable to be activated using stolen or damaged remotes. It is also tamper-proof and does not have any external wiring, making it hard to remove.
It shields your precious possessions from key-long, hacking and key theft by stopping the engine from beginning until you input a specific PIN code. This is done by using existing buttons in the vehicle such as the ones on the steering wheel or door panels, as well as the central console to design a customised disarm sequence of up to 20 presses (like entering a PIN into your smartphone).
It will only work if you enter the correct pin code. This makes it very difficult for thieves to steal your vehicle and is simple to use. If you are concerned about not remembering your pin code, you can ask the installer to supply you with a driver's fob that allows you to drive the car in the normal way.
The absence of key fobs or LED indicators also means that the Ghost immobiliser cannot be detected by the diagnostic equipment or RF scanners commonly used by thieves to determine the presence of the system. This installation that is stealthy enhances its effectiveness and allows the system to be placed in a position where it is difficult for thieves to gain access.
Ghost immobilisers can be an affordable and effective way to deter thefts and increase the value of your car. They are also recognized by some insurance companies and can lead to reduced costs.
No Damage
If your car is fitted with a ghost ignition system, you will have the peace of peace of mind knowing that your vehicle is secure against cloning, hacking, key fob theft, and other typical methods of theft. This is especially crucial if you've invested a lot of money and time customizing your vehicle or have an uncommon or expensive model. Ghost immobilisers work silently and require no additional components or installation.
The system lets you create an individual pin code that needs to be entered in order for the engine to begin. It is activated by buttons on your steering wheel or console, as well as on your door panels. The sequence can be modified by you at any time, which means that even if a burglar knows your pin number it is not possible for them to start your car. The device can also be disabled in the service valet mode which allows you to drive your car away for cleaning or servicing without having it activated.
This means that even if your vehicle is stolen or cloned, the thief will not be in a position to start your car and be caught. The system will also notify you of any tampering with your vehicle's wiring system like cutting or signal interference, and will send the information to your phone which allows you to check that the security of your vehicle is in place at all times.
But, there might come a time when you're looking to take off or disable the Ghost Immobiliser, perhaps for maintenance or for resale. In this scenario you'll need to follow a carefully-planned procedure in order to disconnect the device without damaging the wiring system of your vehicle. It is highly advised to wear protective gloves during the procedure, and also utilize an emergency flashlight to illuminate the dark areas of your vehicle where the immobiliser is likely to be. It is also worth referring to any installation documentation or user manuals that you may have to determine the exact location of the device.
Then, you can connect the battery to your vehicle and test it to make sure that the immobiliser is operating properly and that all electrical components function in the way you intended. The next step is to connect any wires that were cut using electrical tape or soldering when required. Be sure that there aren't any wires exposed and that any cables that are hanging are secured with zip ties or other suitable method. Also, schedule a car inspection with a professional make sure that the removal process did not cause damage to other systems within your car.